If I had to name the single most common job in Derby's shared houses, it would be a mouldy shower. Black silicone, a speckled ceiling and paint peeling above the tray. Landlords often tell me it was only painted last year.
Why it happens so fast
An en-suite in an HMO is usually a small room with no window and a fan that is too weak, switched off or clogged. One tenant showering every day puts a lot of moisture into that space. Warm, wet air settles on the coldest surfaces, which are the ceiling and the corners, and mould follows.
Painting over it does not work
Ordinary emulsion over mould looks fine for a few weeks. The mould is still alive underneath and comes back through. The same goes for running fresh silicone over old: it will not stick properly and the black line returns.
The order that works
- Treat the mould first. Kill it and clean it off before anything else goes on the wall.
- Deal with flaking paint. Scrape back, fill and seal so the new paint has something sound to grip.
- Use the right paint. An anti-mould paint on the ceiling and an emulsion with anti-mould additive on the walls.
- Strip the silicone out fully and reseal the shower with a fresh bead.
- Check the fan. If it is not pulling air, the problem will return however good the paint is. A new fan is a job for an electrician.
What it costs
From my price guide: damp and mould treatment is from £50, two coats of emulsion with anti-mould additive in an en-suite is £100, an anti-mould ceiling is £80 and a shower reseal is £55.
A tip for agents
Add the bathroom ceiling and the shower seal to every routine inspection. Caught early it is a reseal. Left for a year it is a full treatment and redecoration, and usually an unhappy tenant too.
Need one looked at? Send me a photo and I will tell you what it needs. Related: tiling and sealant.
Areas covered
Based in Derby and working across the city centre and the neighbourhoods around it.
Send the job list. Get a quote.
Text a photo, email a snag list or ring for a chat. Quotes are free.